Nutritional Supplement Review

Shopping for Supermarket Protein Sources that Enhance Your Bodybuilding Diet (Bodybuilding Articles)

If you are getting into bodybuilding then you need to understand that what you eat is just as important as what you exercise. In other words, you can lift as many weights as you like but if your muscles are not getting the fuel they need to grow, you are wasting a great deal of effort.

You Need Protein

With just a little research into an effective bodybuilding diet you will quickly discover that enough protein is one of the most (some say "the" most) important parts of your nutritional intake. In short, protein is the building block of lean muscle - a lack of protein means your muscle building potential is much lower.

There are many opinions on how much protein your body needs each day and it may depend on your bodybuilding goals. Typically you might consider taking around 1 gram of protein per pound of your body weight each day.

Using Nutritional Information to Choose Your Foods

There are plenty of foods in your local supermarket or grocery store that contain a useful amount of protein. Today's regulations that ensure food product manufacturers display the nutritional content of their product make choosing your groceries a breeze. However, before you go running off to buy every high protein food you can find, a certain amount of care must be taken. Take the time to read through the food's nutritional information table in it's entirety. Not only are you looking out for the protein content but you also need to consider fat content, sugar content, carbohydrates, and so on. If your goal is to grow lean muscle then it is a good idea to avoid too many products high in simple sugars, calories and refined carbohydrates.

Popular High Protein Groceries in Your Bodybuilding Diet

You are now ready to hit the supermarket in search of quality protein food sources. These are foods that are high in protein but not so high in other elements that will hinder your lean muscle targets (i.e. calories, carbs, etc.):

MEAT: If you enjoy eating meat then generally 3 meats are recommended. The favorite is chicken (the number of recipes you can find on bodybuilding forums show this). Chicken is very lean and cheap. Similarly, turkey is actually slightly leaner then chicken and has higher protein percentage. "lean" beef (look for cuts that are really red without any visible fat when possible) is another great source of protein.

EGGS: Raw or cooked, eggs are another staple in a lot of bodybuilder's diets. Many people will avoid the yolk of the egg and simply eat the white, discarding some quality protein. It's true that the yolk of an egg contains most of the calories but it also contains most of the eggs nutrients as well as some protein. Why not save a few of the yolks!

FISH: Fish is an important source of protein and many bodybuilders live off cans of tuna. In fact I knew one guy who would mix in a can of tuna with his cereal every morning - not really my idea of a tasty start to the day.

MILK/DAIRY: 'Skimmed' or 'fat free' milk is another good source of quality protein and can be consumed as it is (think homemade shakes or in your breakfast cereal) or in so many dairy foods. You need to take care with which dairy products you choose but there are always options for the dieting conscious. You can eat fat free versions of your favorite yogurts, ice-creams (watch out for other ingredients), cheeses (cottage cheese is always highly recommended), and more.

SOY: The vegetarians amongst you will no doubt be aware of the protein content of soy products. Soy beans are pulses and so they contain a good helping of protein. Soy beans are used to make soy milk, tofu and many meat substitutes, many of which taste like the real thing. This not only helps vegetarian bodybuilders but also people with a lower tolerance for dairy products.

AND...: There are plenty of other foods high in protein such as nuts (good for vegetarians) pulses (another good source for vegetarians), cereals, and so on. Take some time to research other foods on the internet - there is a massive amount of information on websites, forums, newsletters, and so on.

Is Protein All a Bodybuilder Needs?

No. Protein, although a vital part of a bodybuilder's diet, is not the be all and end all. Bodybuilders also need the energy to physically perform their exercises and this comes mostly from carbohydrates, or more specifically, complex carbohydrates. This is a subject of another article so watch this space. You need both a higher protein intake to 'rebuild' your muscle and the appropriate complex carbohydrates to fuel your workouts.

Now go and make a quality protein shopping list then hit the supermarket!

About the Author

Adam Zahler has built the Whey Protein Supplements in Bodybuilding site, a free resource with information on using commercial supplements in your own bodybuilding recipes. Visitors to the site can find recipe ideas and also share their own recipes for making protein shakes, protein bars and other more.

Posted in Bodybuilding Articles | |

Avoid Common Bodybuilding|Weightlifting Injuries-Common Mistakes In Gym (Bodybuilding Articles)

Bodybuilding by weightlifting if done wrongly is a sure recipe for injuries. Sometimes even painful and permanent injuries that will derail your bodybuilding program. This article will address the common injury prone mistakes bodybuilders make in their quest to build a fit and muscular body and how to avoid those weightlifting injuries.

Many people who workout in gyms complain about backaches and they blamed it on their desk bound jobs sitting in front of the computer at long stretches of time. Perhaps they are right. Then why is it that more bodybuilders have backaches when compared to their non gym going colleagues?

Aren?t those people who lift weights are supposed to have stronger back muscles to support their musculature and should be less prone to backaches? I think you are getting the drift. Many bodybuilders suffer from common weightlifting injuries that they don?t even know it.

Many people actually think that if they do not suffer any pain when they are lifting weights, they are not injured. I want to debunk this bodybuilding myth right now. You see, many weight lifting injuries are very often sustained over a period of time.

It is because of the wrong weightlifting form being repeated over and over through many training sessions that cause the wear and tear of joints, tendons, cartilages and muscles. Many injuries do not just occur immediately or overnight like the weights dropping on your toes or painful muscle tear during your lifts.

Therefore executing your weightlifting movements in the correct form and techniques not only help your muscles to grow big and fast, it is also crucial to prevent bodybuilding injuries.

Common causes of injuries can also be attributed to lifting weights that are too heavy or that the bodybuilder who may be sick, and yet headed for the gym when his condition is not optimum for handling the weight he usually lift as he is in a physically weakened state.

So when the weights are too heavy or you are too weak to lift the weights you usually do, you are forced to cheat by swinging the weights up using momentum and lowering the weights by using gravity.

These movements not only waste your time in the gym as they are definitely not helpful in helping you build muscles. They will cause injuries.

An example of a common exercise done in the wrong form and a recipe for injuries is the common bar bell curl.

? Barbell Biceps Curl ? This exercise is perhaps the most commonly executed in the wrong form and causing injuries that people don?t even know why they are injured. In every gym, you will see people swinging their barbells with their body rocking thru and fro in the movements.

The rocking movement places tremendous stress on the shoulder joint which is the most unstable joint in the human body and the lower back. Over time, the shoulder joints and lower back will pay a heavy price for the wrong form and technique used during the lift.

Other common bodybuilding exercises which are often wrongly executed are the lat pull down, bench press, leg extension, military press and list goes on.

So the next time when you have backache or joint pain, don?t blame it on other causes if you are a bodybuilder and that you lift weights often. Just reflect on the weightlifting exercises you are doing and examined them as to whether they are the cause of your injuries.

Better yet, hire a personal trainer or a bodybuilding book with picture illustration and description to learn how to lift weights in the correct form and technique to prevent common and serious weight lifting injuries.

About the Author:

Chris Chew is a fitness personal trainer of actors, pageant winners, fashion models and other celebrities. More articles on his websites Lose body fat build lean muscles fast and Choose your fitness trainer

Posted in Bodybuilding Articles | |

Positioning Of The Spine During Bodybuilding Workout (Bodybuilding Articles)

Although the entire body needs to be properly positioned during bodybuilding workout, the axial skeleton and its immediate attachments are of greatest concern and require particular attention. Correctly positioning and stabilizing the spine, neck and pelvis during resistance-training exercises are especially important. To see better how these areas should be positioned during exercise, you should first be aware of how they are positioned when held or stabilized aat ret. Not everyone has the same degree of spinal curvature, and some may have spinal abnormalities. If you or someone you are training has any of these abnormalities or any type of back problems, be sure a doctor is consulted before beginning any exercises program.

Different schools of thought exist regarding the spine and exercise. Some people advocate flattening the back during most any exercise in which a bench, pad, or some sort of outside support is present. The theory behind this concept is to reduce the stress on the spine, intervertebral disks, and lower-back area by bracing them against a support. Flattening the back actually requires most people to tilt the pelvis posteriorly. The spine is in its strongest position and the disks are under the least amount of compression when the spine, neck and pelvis are all in a neutral position with the normal arches and curvatures intact. With this in mind, we prefer to do most every exercise while keeping the lumbar spine and the cervical spine in a neutral position. The only change is a slight degree of extension or straightening through the thoracic religion. To do this, we simply pull the shoulder blades together and lift the chest slightly up and out while maintaining the ntural arch in the lumbar and cervical regions of the spine. An example of this would be soldiers standing at attention with their shoulders back and their chest out. This spinal positioning is called a ready position.

Positioning the spine in this manner supports weight more efficiently and still allows for the least amount of intervertebral disk compression in the cervical and lumbar regions. Instead of bracing the lower back by flattening it, you should maintain the natural arch in the lumbar spine. Maintaining this position will require stabilization from the muscles throughout the back, particularly those of the lower region. This is an added benefit. These muscles will be working to stabilize what is a natural and desirable spinal position while the targeted muscles are working against the resistance. Muscles of the trunk and lower back are typically weak links in most individuals. Using this positioning will help to strengthen and stabilize these weak links rather than pacifying them. Isn't strengthening weak muscles one of the reasons we do resistance training in the first place ?

About the Author:

For more resources : http://www.101bodybuilding.com http://www.101cookingrecipes.com http://www.desserts-recipes.com

Posted in Bodybuilding Articles | |